NCERT Solutions for Class 8 Science Chapter 4 Combustion and Flame
Question 1:
List conditions under which combustion can take place.
दहन की परिस्थितियों की सूची बनाइए।
Answer
The conditions required for combustion to take place are:
(a) Presence of a fuel
(b) Air (or oxygen)
(c) Ignition temperature.
दहन की परिस्थितियाँ:
(a) एक दाह्य पदार्थ या ईंधन,
(b) ऑक्सीजन,
(c) ज्वलन ताप
Question 2:
Fill in the blanks.
(a) Burning of wood and coal causes _______ of air.
(b) A liquid fuel, used in homes is ________ .
(c) Fuel must be heated to its _______ before it starts burning.
(d) Fire produced by oil cannot be controlled by ______.
रिक्त स्थानों की पूर्ति कीजिए
(a) लकड़ी और कोयला जलने से वायु का ............ होता है।
(b) घरों में काम करने वाला एक द्रव ईंधन ............. है।
(c) जलना प्रारंभ होने से पहले ईंधन को उसके ........... तक गर्म करना आवश्यक है।
(d) तेल द्वारा उत्पन्न आग को .............. द्वारा नियंत्रित नहीं किया जा सकता।
Answer
(a) pollution; (b) LPG; (c) ignition temperature; (d) water
(a) प्रदूषण, (b) केरोसीन, (c) ज्वलन ताप, (d) पानी
Question 3:
Explain how the use of CNG in automobiles has reduced pollution in our cities.
समझाइए कि मोटर वाहनों में सीएनजी के उपयोग से हमारे शहरों का प्रदूषण किस प्रकार कम हुआ है।
Answer
CNG is cheap, readily available and highly combustible. It has high calorific value. It does not produce gases or residues when used in automobiles, so it reduced the pollution in our cities. The use of CNG in automobiles has reduced pollution in our cities because CNG produces the harmful product in very small amount and it is a cleaner fuel.
पेट्रोल और डीजल की तुलना में सीएनजी एक स्वच्छ ईंधन है, यानि इसके दहन से बहुत ही कम प्रदूषण होता है। इसलिए मोटर वाहनों में सीएनजी के उपयोग से हमारे शहरों का प्रदूषण काफी हद तक कम हुआ है।
Question 4:
Compare LPG and wood as fuels.
ईंधन के रूप से एलपीजी और लकड़ी की तुलना कीजिए।
Answer
| Wood | LPG |
|---|---|
| High Ignition temperature. | Low Ignition temperature. |
| It is smokeless fuel.. | It gives out lot of smoke. |
| It has less calorific value about 17000 to 22000 kJ/kg | It has more calorific value about 55000 kJ/kg |
| लकड़ी | एलपीजी |
|---|---|
| यह भारी होती है और इसकी ढ़ुलाई में बहुत मेहनत लगती है। | एलपीजी की ढ़ुलाई आसान होती है। |
| लकड़ी को जलाने से अधिक प्रदूषण होता है। | एलपीजी को जलाने से बहुत कम प्रदूषण होता है। |
| ऊष्मीय मान 17000 से 22000 किलोजूल प्रति किलोग्राम है। | ऊष्मीय मान 55000 किलोजूल प्रति किलोग्राम है। |
Question 5:
Give reasons.
(a) Water is not used to control fires involving electrical equipment.
(b) LPG is a better domestic fuel than wood.
(c) Paper by itself catches fire easily whereas a piece of paper wrapped around an aluminium pipe does not.
कारण बताइए
(a) विद्युत उपकरण से संबद्ध आग पर नियंत्रण हेतु जल का उपयोग नहीं किया जाता।
(b) एलपीजी लकड़ी से अच्छा घरेलू ईंधन है।
(c) कागज स्वयं सरलता से आग पकड़ लेता है जबकि ऐलुमिनियम पाइप के चारों ओर लपेटा गया कागज का टुकड़ा आग नहीं पकड़ता।
Answer
(a) Water is a conductor of electricity, so it can easily conduct electric current and cause danger of electric shocks or short-circuits. Therefore, water can not be used to control the fire involving electrical equipment.
विद्युत उपकरण से संबद्ध आग को पानी से बुझाने की कोशिश नहीं करनी चाहिए। सामान्य जल, विद्युत का चालक होता है क्योंकि उसमें कुछ लवण घुले रहते हैं। इससे आग बुझाने वालों को बिजली का झटका लगने का खतरा रहता है।
(b) LPG is a better domestic fuel as it does not produce smoke and un-burnt carbon particles, which cause respiratory problems.
लकड़ी की तुलना में एलपीजी का ऊष्मीय मान बहुत अधिक है। इसका मतलब है कि एलपीजी अधिक दक्ष ईंधन है। लकड़ी को जलाने से काफी धुँआ निकलता है और राख भी निकलती है। यह समस्या एलपीजी के साथ नहीं होती है। इसलिए एलपीजी, लकड़ी से अच्छा घरेलू ईंधन है।
(c) Paper by itself catches fire easily because it has low ignition temperature but when wrapped around an aluminium pipe its temperature is lowered due to aluminium metal absorbing the heat supplied to paper. So it does not catch fire.
जब ऐलुमिनियम पाइप के चारों ओर लपेटे गए कागज को गर्म किया जाता है तो अधिकतर ऊष्मा का चालन ऐलुमिनियम पाइप तक हो जाता है। इससे कागज का तापमान उसके ज्वलन ताप से कम बना रहता है और कागज में आग नहीं लगती है।
Question 6:
Make a labelled diagram of a candle flame.
मोमबत्ती की ज्वाला का चिह्नित चित्र बनाइए।
Answer
Question 7:
Name the unit in which the calorific value of a fuel is expressed.
ईंधन के ऊष्मीय मान को किस मात्रक द्वारा प्रदर्शित किया जाता है?
Answer
Kilojoules per kilogram (kJ/kg)
किलोजूल प्रति किलोग्राम (kJ/kg)
Question 8:
Explain how CO2 is able to control fires.
समझाइए कि कार्बन डाईऑक्साइड किस प्रकार आग को नियंत्रित करती है।
Answer
Being heavier than oxygen, CO2 covers the fire like a blanket. Since the contact between the fuel and oxygen is cut off, the fire is controlled.
कार्बन डाईऑक्साइड हवा से भारी होने के कारण आग के ऊपर एक परत बना लेता है। कार्बन डाईऑक्साइड तेजी से फैलता है और तापमान को कम करता है। इससे आग बुझाने में मदद मिलती है।
Question 9:
It is difficult to burn a heap of green leaves but dry leaves catch fire easily. Explain.
हरी पत्तियों के ढ़ेर को जलाना कठिन होता है परंतु सूखी पत्तियों में आग आसानी से लग जाती है, समझाइए।
Answer
Green leaves have a lot of moisture in them. This moisture does not allow them to catch fire easily. However, dry leaves have no moisturein them. Therefore, they catch fire easily.
हरी पत्तियों में पानी मौजूद होता है। इसलिए जब हरी पत्तियों में आग लगाने की कोशिश की जाती है तो अधिकतर ऊष्मा पानी को गर्म करने में इस्तेमाल हो जाती है। इसलिए हरी पत्तियों के ढ़ेर को जलाना कठिन होता है। सूखी पत्तियों में पानी न होने कारण आग आसानी से लग जाती है।
Question 10:
Which zone of a flame does a goldsmith use for melting gold and silver and why?
सोने और चाँदी को पिघलाने के लिए स्वर्णकार ज्वाला के किस क्षेत्र का उपयोग करते हैं और क्यों?
Answer
A goldsmith uses the outer part of the candle flame for melting gold and silver because in this zone the temperature is the highest which helps to melt these metals easily.
ज्वाला के सबसे बाहरी क्षेत्र का तापमान सबसे अधिक होता है। इसले सोने और चाँदी को पिघलाने के लिए स्वर्णकार ज्वाला के बाह्य क्षेत्र का उपयोग करते हैं।
Question 11:
In an experiment 4.5 kg of a fuel was completely burnt. The heat produced was measured to be 180,000 kJ. Calculate the calorific value of the fuel.
एक प्रयोग में 4.5 किग्रा ईंधन का पूर्णतया दहन किया गया। उत्पन्न ऊष्मा का माप 180,000 किलो जूल था। ईंधन का ऊष्मीय मान परिकलित कीजिए।
Answer
Total mass of fuel = 4.5 kg
Heat produced = 180,000 KJ
Calorific Value of the fuel = 180,000KJ / 4.5 Kg = 40,000 KJ/ Kg.
ईंधन का कुल द्रव्यमान = 4.5 किग्रा
दिए गए ईंधन की मात्रा से उत्पन्न ऊष्मा = 180,000 किलो जूल
ऊष्मीय मान = उत्पन्न ऊष्मा ÷ कुल द्रव्यमान = 180,000 किलो जूल ÷ 4.5 किलोग्राम
= 40,000 KJ/ Kg
Question 12:
Can the process of rusting be called combustion? Discuss.
क्या जंग लगने के प्रक्रम को दहन कहा जा सकता है? विवेचना कीजिए।
Answer
Combustion is a chemical process in which a substance reacts with oxygen and gives out energy during the process in the form of either heat or light or both. Rusting of iron is an exothermic process as heat is released during rusting.
जंग लगने के प्रक्रम में लोहा और ऑक्सीजन के बीच प्रतिक्रिया होती है। लेकिन इस प्रतिक्रिया में ऊष्मा या प्रकाश नहीं निकलता है। इसलिए जंग लगने के प्रक्रम को दहन नहीं कहा जा सकता है।
Question 13:
Abida and Ramesh were doing an experiment in which water was to be heated in a beaker. Abida kept the beaker near the wick in the yellow part of the candle flame. Ramesh kept the beaker in the outermost part of the flame. Whose water will get heated in a shorter time?
आबिदा और रमेश ने एक प्रयोग किया जिसमें बीकर में रखे जल को गर्म किया गया। आबिदा ने बीकर को मोमबत्ती की ज्वाला के पीले भाग के पास रखा। रमेश ने बीकर को ज्वाला के सबसे बाहरी भाग के पास रखा। किसका पानी कम समय में गर्म हो जाएगा?
Answer
The water in the Ramesh's beaker will heat up in a shorter time. This is because the outermost zone of a flame is the hottest zone, while the yellow zone (in which Abida had kept the beaker) is less hot.
ज्वाला के सबसे बाहरी भाग का तापमान सबसे अधिक होता है। इसलिए रमेश का पानी कम समय में गर्म हो जाएगा।
Comments
Post a Comment